Ceramic Industry Entrepreneur Optimistic of Production Growing 15 Percent in 2022: https://ekonomi.bisnis.com/read/20220708/257/1552832/pengusaha-industri-keramik-optimistis-produksi-tumbuh-15-persen-tahun-ini/8 July 2022
Ceramic industry entrepreneurs are optimistic that production volume will grow 15 percent annually in 2022. This is predicted to be driven by a surge in demand during the peak season. General Chairperson of the Indonesian Ceramics Association (Asaki) Edy Suyanto expressed optimism that the target for a 15 percent growth in ceramic production volume in Indonesia this year will range from 475 to 480 million m2. "The production target is 475 -480 million m2 and the utilization rate is 85 percent. This optimism is supported by the demand for ceramics on an annual trend, which will experience a peak season," said Edy to Bisnis, Friday (8/7/2022).
Based on annual trends, he continued, the peak season for the surge in ceramic demand is expected to occur in the second semester of 2022. In particular, in the third quarter of 2022, in addition to export performance which is still good. In semester I/2022, national ceramic exports recorded a positive double-digit growth of around 11 percent on an annual basis.
CERAMIC INDUSTRY: Year Growth Slows, only 8% : http://industri.bisnis.com/read/20140529/257/231435/industri-keramik-pertumbuhan-tahun-ini-melambat-hanya-8/29 May 2014
Ceramics industry growth this year certainly will not be as good as last year. This year, the industry is targeting growth only about 8%.
Chairman of the Indonesian Ceramic Association (Asaki) Elisa Sinaga said the slowdown in the ceramic industry this year due to the weak property market. When in 2013 the growth could reach 15%, this year is not expected to reach 10%, or about 8% only.
"Yes, because the property is weakened so demand also slowed; in essence, still growing but slowing, "said Elisa, Thursday (29/05/2014).
Despite slowing growth, the ceramic industry is ready to face the ASEAN Economic Community (AEC) in 2015 along with the implementation of the standardization of ceramic products are sold in Indonesia. Currently, the industry is ready with the application of standardization ceramic products with labeling Indonesian National Standard (SNI). "Like it or not we have to be ready. Ceramic industry has been improving the quality of products to compete with the outside. "
Porcelain Products Manufacturing in Indonesia
Indonesia Industry Report and Market Research
September 29, 2023
Industry Code : C3611
Forecast to : 2027
Definition
Porcelain Products Manufacturing in Indonesia Manufacture of porcelain household furniture, building materials, laboratory, electrical, and technical tools with equipment made of porcelain.
Activities
The primary activities of firms in this industry are:
-
Ceramic building bricks, flooring blocks, support or filter tiles and the like.
-
Building bricks.
-
Roofing files, chimney pots, cowls, chimney liners, architectural ornaments and other ceramic constructional goods.
-
Roofing tiles.
-
Ceramic pipes, conduits, guttering and pipefitting.
-
Unglazed ceramic flags and paving, hearth or wall tiles.
-
Unglazed ceramic mosaic cubes and the like, whether or not a backing.
-
Tiles, cubes and similar articles.
-
Glazed ceramic flags and paving, hearth or wall tiles.
-
Glazed ceramic mosaic cubes.
-
Ceramic wares for Laboratory, chemical or other technical uses.
-
Ceramic troughs, tubs and similar receptacles of a kind used in agriculture.
-
Ceramic pots, jars.
-
Ceramic sinks, wash basins, wash basin pedestals, baths, bidets, water closet pans, flushing cisterns, urinals and similar sanitary fixtures.
-
Ceramic tableware, kitchenware, other household articles and toilet articles.
The Porcelain Products Manufacturing industry in Indonesia research report contain trend analysis, statistics, market size information, industry growth rates as well as major competitors.
Major market segments are identified and also those forces affecting demand and supply within this industry. Performance analysis includes emerging industry trends as well as recent results and performance of each key company. Drawing on the depth of information DIS also provides 5 year forecasts for this industry.
The comprehensive study also examines details such as the barriers to entry, operating cost structure, technology & systems and domestic & international markets. Tables and statistics include: Industry revenue, exports, imports, wages and number of companies in the industry, Industry growth and geographic regional data.
The key indicators for the industry for last five years are provided here, and include: • Industry Revenue • Industry Value Added • Employment • Establishments • Exports • Imports • Domestic Demand • Total Wages
Market Size
This section gives the size of the domestic market and the size of the export market for each industry.
Linkages
This section lists the industry"s major supplier and its major customer industries, with SIC"s (KLUI) for easy reference.
Demand Determinants
Lists the key factors which are likely to cause demand to rise or fall.
Domestic and International Markets Exports
The trend for the size of exports (are they increasing, decreasing, not changing) and the trend for the size of exports as a proportion of turnover. The size of the domestic market (domestic demand) and the proportion of this accounted for by exports Imports
Outlines the trend for the size of domestic demand and the trend for imports as a proportion of domestic demand States the size of the domestic market (domestic demand) and the proportion of this accounted for by imports Analysis
Domestic and international markets defines the market for the products and services of this industry, both locally and in other countries. This outlines: the size of the domestic market (domestic demand) and the proportion of this accounted for by imports, the key countries from which imports are sourced (with percentage and relative size if available), the trend for the size of domestic demand and the trend for imports as a proportion of domestic demand, the size of turnover and the size of exports as a proportion of turnover, the key export destinations (percentages and relative importance of these, if available, the trend for the size of exports (are they increasing, decreasing, not changing) and the trend for the size of exports as a proportion of turnover.
Basis of Competition
Gives the key types of competition between firms within the industry. It also highlights competition from substitute products in alternative industries.
Products and Service Segmentation
This details the key products and/or services provided by this industry. Wherever possible, we include an indication as to which of these are the most important to demonstrate which have a more significant influence over industry results as a whole.
Major Market Segments
The key client industries and/or groups are detailed here. Wherever possible, an indication as to which of these are the most important is included. This will highlight the client groups that are most important to the industry. Trends in these client groups may have an important impact on the demand for products and services provided by the SIC, hence they may be important to monitor suggested links
Industry Concentration
This is an indicator of how much industry turnover is accounted for by the top players.
Geographic Spread
This is a guide to the regional share of industry turnover/gross product. DIS calculates this on the basis of turnover or production, however, the number of establishments may be used as a proxy where these are not available.
Barriers to Entry
This section outlines factors that can prevent a new company from entering the industry and will also give an indication of the extent to which this occurs.
Taxation
Taxation refers to all kinds of taxation that are specific or are particularly important to an industry. This includes taxation concessions.
Industry Assitance
Assistance refers to government and/or other measures in place designed to improve the performance of the industry or sections of the industry. (eg grants, subsidies)
Regulation and Deregulation
Where licenses are required to operate in an industry, these will be noted here. Where possible, details regarding the degree of difficulty in obtaining a licence are included. Important issues relating to regulation and deregulation are included here.
Cost Structure
The average costs for a company operating in this industry as a percentage of total revenue.
Capital and Labour Intensity
Provides a guide to the amount of capital used in production/providing a service compared to the amount of labor in the total mix of inputs.
Technology and System
Acknowledges the latest technology and/or systems available to this industry within the country. Technology refers to machinery and equipment (such as computerisation) which enables better and more efficient production. Systems refer to methods of production that also enables better and more efficient production.
Industry Volatility
Industry volatility refers to the year on year fluctuations, which occur in industry output.
Globalization
This gives an indication of the extent to which the industry is global. As a guide, we base its definition of the level of globalization on a number of factors, some of which include: the level of foreign ownership, the proportion of demand accounted for by foreign operators, and in the case of industries dominated by domestic participants, the volume of production conducted in other countries.
Historical Performance
This section details previously important events in the development of the industry
Current Performance
This is the key analysis section for the industry over the past five years. The key performance indicators for the industry in question are discussed, providing trends and explanations for occurrences in the industry.
Key Sensitivities
The sensitivities are factors that are outside of the control of an operator of the industry, but are likely to have significant impact on a business.
Key Success Factors
These are the factors within the control of the operator and which should be followed in order to be successful. Often these may include behavior that will help to minimise the effects of the key sensitivities.
