Cocoa exports 1.1 Million Dollars Bali Translucent - Five Countries So Buyer Largest : http://balitribune.co.id/2015/10/ekspor-kako-bali-tembus-11-juta-dolar-lima-negara-jadi-pembeli-terbesar/7 October 2015
Bali cocoa exports worth 1.1 million US dollars over an eight period from January to August 2015 by shipping as much as 151.8 tons. "Average price of cocoa production Bali seems to be much better, so even if the volume is reduced 85 per cent but the value increased 16.63 percent," said Head of Foreign Trade, Department of Industry and Trade of the Province of Bali Maede Suastika in Denpasar, Tuesday (6/10 ).
He said Bali during the period January-August 2014 cocoa shipped to overseas markets as much as 1,059 tons worth 978 thousand dollars, or an average of 0.9 dollars per kg, while the same period in 2015 recorded 151.8 tons for $ 1.1 million dollars, or an average of 7.5 dollars per kg.
There are at least five major buyer countries cacao farmers of this area namely the United States, Britain, Firlandia, Malaysia and Australia, in addition to other countries such as France began exploring businessman to buy the plantation area.
Agriculture Trade Cycle disadvantaged Farmers : http://analisadaily.com/news/read/siklus-perdagangan-hasil-pertanian-rugikan-petani/48185/2014/07/17-17 July 2014
The length of the cycle of the supply chain of agricultural products are often detrimental to farmers. Termination of the chain is considered necessary for farmers to have bargaining power and can feel the profits they generate.
"We will soon break the chain of trade in agricultural products. For farmers we never could enjoy the fruits of his labor itself due to the length of the chain of distribution that occurred from the farmer to fall to consumers, "said Chairman of the Indonesian Farmers Association (HKTI) Medan, Sony Coal in Analysis, Wednesday (16/7 ).
It said it plans to establish agricultural cooperatives, which will compete with the collection agency. The cooperative was created for the purchase of agricultural products directly from farmers at a price much higher than the price set by the agent or the collecting over the years.
"After we review in the market, it can be concluded that if farmers do not sell their crops to the dealer or collector, will be far greater income and standard of living would be much better. For that, farmers should be able to break the chain of the trade, and we are the ones who will push it, "he explained.
Sony said the farmer's market presence also in a very important position. Therefore, although its presence on the move, but there the farmers can sell directly to consumers in their villages.
"So it is fair trade. Farmers are not harmed by the collecting agency. Therein also, we wanted to break the chain," he said.
Agricultural and Plantation Products Wholesaling in Indonesia
Indonesia Industry Report and Market Research
September 24, 2018
Industry Code : F61312
Forecast to : 2022
Definition
Agricultural and Plantation Products Wholesaling in Indonesia Wholesale trading in commodities, the products of agricultural garden crops and other plants like tobacco leaves, tea leaves, coffee beans, coconuts, quinine, cloves, rubber sap, pepper, nutmeg, lemon grass, mushrooms, turmeric and seeds of non-food plants.
Activities
The primary activities of firms in this industry are:
-
Wholesale trading in rubber sap.
-
Wholesale trading in coconut and copra.
-
Wholesale trading in palm oil.
-
Wholesale trading in coffee grain.
-
Wholesale trading in cocoa.
-
Wholesale trading in pepper.
-
Wholesale trading in nutmeg.
-
Wholesale trading in vanilla.
-
Wholesale trading in kapok.
-
Wholesale trading in cotton.
-
Wholesale trading in clove.
-
Wholesale trading in tobacco leaf.
-
Wholesale trading in tealeaf.
-
Wholesale trading in other plantation product n.e.c.
The Agricultural and Plantation Products Wholesaling industry in Indonesia research report contain trend analysis, statistics, market size information, industry growth rates as well as major competitors.
Major market segments are identified and also those forces affecting demand and supply within this industry. Performance analysis includes emerging industry trends as well as recent results and performance of each key company. Drawing on the depth of information DIS also provides 5 year forecasts for this industry.
The comprehensive study also examines details such as the barriers to entry, operating cost structure, technology & systems and domestic & international markets. Tables and statistics include: Industry revenue, exports, imports, wages and number of companies in the industry, Industry growth and geographic regional data.
The key indicators for the industry for last five years are provided here, and include: • Industry Revenue • Industry Value Added • Employment • Establishments • Exports • Imports • Domestic Demand • Total Wages
Market Size
This section gives the size of the domestic market and the size of the export market for each industry.
Linkages
This section lists the industry"s major supplier and its major customer industries, with SIC"s (KLUI) for easy reference.
Demand Determinants
Lists the key factors which are likely to cause demand to rise or fall.
Domestic and International Markets Exports
The trend for the size of exports (are they increasing, decreasing, not changing) and the trend for the size of exports as a proportion of turnover. The size of the domestic market (domestic demand) and the proportion of this accounted for by exports Imports
Outlines the trend for the size of domestic demand and the trend for imports as a proportion of domestic demand States the size of the domestic market (domestic demand) and the proportion of this accounted for by imports Analysis
Domestic and international markets defines the market for the products and services of this industry, both locally and in other countries. This outlines: the size of the domestic market (domestic demand) and the proportion of this accounted for by imports, the key countries from which imports are sourced (with percentage and relative size if available), the trend for the size of domestic demand and the trend for imports as a proportion of domestic demand, the size of turnover and the size of exports as a proportion of turnover, the key export destinations (percentages and relative importance of these, if available, the trend for the size of exports (are they increasing, decreasing, not changing) and the trend for the size of exports as a proportion of turnover.
Basis of Competition
Gives the key types of competition between firms within the industry. It also highlights competition from substitute products in alternative industries.
Products and Service Segmentation
This details the key products and/or services provided by this industry. Wherever possible, we include an indication as to which of these are the most important to demonstrate which have a more significant influence over industry results as a whole.
Major Market Segments
The key client industries and/or groups are detailed here. Wherever possible, an indication as to which of these are the most important is included. This will highlight the client groups that are most important to the industry. Trends in these client groups may have an important impact on the demand for products and services provided by the SIC, hence they may be important to monitor suggested links
Industry Concentration
This is an indicator of how much industry turnover is accounted for by the top players.
Geographic Spread
This is a guide to the regional share of industry turnover/gross product. DIS calculates this on the basis of turnover or production, however, the number of establishments may be used as a proxy where these are not available.
Barriers to Entry
This section outlines factors that can prevent a new company from entering the industry and will also give an indication of the extent to which this occurs.
Taxation
Taxation refers to all kinds of taxation that are specific or are particularly important to an industry. This includes taxation concessions.
Industry Assitance
Assistance refers to government and/or other measures in place designed to improve the performance of the industry or sections of the industry. (eg grants, subsidies)
Regulation and Deregulation
Where licenses are required to operate in an industry, these will be noted here. Where possible, details regarding the degree of difficulty in obtaining a licence are included. Important issues relating to regulation and deregulation are included here.
Cost Structure
The average costs for a company operating in this industry as a percentage of total revenue.
Capital and Labour Intensity
Provides a guide to the amount of capital used in production/providing a service compared to the amount of labor in the total mix of inputs.
Technology and System
Acknowledges the latest technology and/or systems available to this industry within the country. Technology refers to machinery and equipment (such as computerisation) which enables better and more efficient production. Systems refer to methods of production that also enables better and more efficient production.
Industry Volatility
Industry volatility refers to the year on year fluctuations, which occur in industry output.
Globalization
This gives an indication of the extent to which the industry is global. As a guide, we base its definition of the level of globalization on a number of factors, some of which include: the level of foreign ownership, the proportion of demand accounted for by foreign operators, and in the case of industries dominated by domestic participants, the volume of production conducted in other countries.
Historical Performance
This section details previously important events in the development of the industry
Current Performance
This is the key analysis section for the industry over the past five years. The key performance indicators for the industry in question are discussed, providing trends and explanations for occurrences in the industry.
Key Sensitivities
The sensitivities are factors that are outside of the control of an operator of the industry, but are likely to have significant impact on a business.
Key Success Factors
These are the factors within the control of the operator and which should be followed in order to be successful. Often these may include behavior that will help to minimise the effects of the key sensitivities.
